What Is DNS?

In networking, DNS implies Domain Name System and this is the extremely thing liable for the association of client with website pages without utilizing IP addresses. For utilizing internet clients use area names to access the sites though the internet browsers utilize the IP addresses to access something very similar. DNS fills the need of interpreter between a space name and IP Address so the program gets the IP address each time somebody inputs a Domain name.

On the internet, there are an excessive number of gadgets to check that are connected to one another and each of these has their IP address. These IP Addresses are utilized by gadgets to perceive different gadgets and DNS permits client to interface with these gadgets without utilizing their IP address. It’s a difficult situation to recall the IP Address be it the IPv4 or the more up to date and more perplexing IPv6 so DNS spares the difficulty for clients.

Each time a pursuit is made DNS goes about as an interpreter on the internet to make the inquiry conceivable without the utilization of the real IP address straightforwardly.

What Is the Service Set Identifier (SSID)?

SSID or Service Set Identifier in networking is the advanced presence mark for networks that are editable and are built by basic dialects and characters. A more simplified clarification is SSID are the names that are obvious as accessible networks on a gadget, for example, a PC or a cell phone. The basic case of SSID that can be seen each day is accessible WiFi or the hotspot name that is set physically or of course. Each network has a SSID and for items, the SSID as a matter of course is typically their image name or the model name as in routers or modems.

Default SSIDs of any gadget is the one that is on it working without getting set physically. It’s simply the name of hotspot or WiFi that you tap on for getting connected to that network once in a while with a password or even without that. Manual SSIDs are proposed for keeping the network secure instead of the default SSIDs that are more powerless against programmers. A network can likewise have more than one SSID and the SSID can be changed for any wireless network by the host.

Difference Between Static and Dynamic IP

An IP address represents Internet Protocol and now there are these two sorts of IP addresses that can be effortlessly separated. There is Static IP which as it sounds is un-editable and more coordinated towards its lasting presence. Then again, Dynamic IP is dynamic as it very well may be changed and is editable to a superior degree. There are some straightforward the contrasts between both the IP and one is the way it is given. A static IP address is given to the PC by ISP though the dynamic IP address is generally given by DHCP. Static IP continues as before once it is alloted to a PC of the gadget though Dynamic IP can be changed whenever.

Static and Dynamic IP is diverse for security reasons also because of the less security on Static IP though Dynamic IP is safer and contains less danger. The static IP address permits a gadget to be detectable then again Dynamic IP address makes the gadget unmanageable. Soundness additionally has any kind of effect in both the IPs as the Static IP address is steady when contrasted with Dynamic IP address.

What Is an IP Address?

IP Address represents Internet Protocol Address and is a mathematical name that every one of the gadgets chipping away at the internet is appointed. For various PCs and gadgets conveying on the internet, there is a similar number of IP addresses. This IP address is comprised of numbers that can be perused by clients typically as a basic language. It serves a significant part in PC networking and has two capacities in networking. The two elements of the IP Addresses are interface identification and area addressing as it is answerable for the identification of gadgets or PCs.

The two Internet conventions that are very notable are Internet Protocol variant 4 (IPv4) and Internet Protocol form 6 (IPv6). IPv4 is a more seasoned or obsolete variant as it peruses IP addresses as a 32-cycle number. IPv6 was close to IPv4 as the clients over the internet expanded and IPv4 finished with the absence of IPv4 addresses. IPv6 ended up better because of the 128-digit number in IP addresses that began in the year 1998. IP addresses are straightforward numbers thus they are coherent without need of any product as it’s simply a basic mathematical organization.

How to Create A Guest Wi-Fi Network?

On the off chance that you are having visitors over at your place frequently, at that point it gets difficult for you to give them access to the internet. You need to give them access to the internet and yet, you likewise don’t have any desire to share your safe, private, home network with any other individual. There are really two different ways by which you can give your visitors access to your Internet network. Either share the subtleties of private, home Wi-Fi network which you utilize or make a Guest Wi-Fi Network for visitors.

What the vast majority would prefer not to do is share their private, home Wi-Fi network with visitors in light of the fact that not exclusively is there an opportunity for the data to be taken yet there is additionally the chance of malware unknowingly spread from the visitors’ gadgets.

Thus, for that reason there is the requirement for a different, surmise Wi-Fi network which can furnish the visitors with internet connectivity and furthermore keep your home network protected and secure. Fortunately, for all the Xfinity clients, there is a component called Xfinity WiFi Home Hotspot through which you give internet access to your visitors without any obstruction with the principle network.

This element, Xfinity WiFi Home Hotspot is accessible without any extra on the off chance that you are a current Xfinity Gateway client. With this component enableed, your Xfinity Wireless Gateway broadcast an extra SSID or WiFi Network, “xfinitywifi”. This is done independently from the principle network, without any obstruction with the primary WiFi network.

Through this network, you can permit your visitors to utilize the internet without you sharing your network password or the fundamental network with them. It is incorporated with the administration without any extra expense and you can enable or disable it whenever you need to.

How to enable the Xfinity WiFi Home Hotspot Feature?

On the off chance that you are a current Xfinity Gateway client and utilizing Xfinity administrations, at that point this component will be accessible without any additional charge. It is a valuable component through which visitors can appreciate the internet without you sharing your principle, secure network with them.

In the event that you have visitors coming at your place frequently, at that point you should keep this element enableed as it comes helpful and permits individuals to appreciate the benefits of Xfinity WiFi.

Here is the manner by which you can enable the Xfinity WiFi Home Hotspot include:

  1. Connect to the Xfinity Gateway Network from your PC or Mobile.
  2. Open an internet browser and head over to customer.xfinity.com/#/settings/security/hotspot.
  3. Sign in to your Xfinity account utilizing the Xfinity ID and login password.
  4. Click on the Turn On catch to enable the Xfinity WiFi Home Hotspot include.
  5. A confirmation brief will show up, confirm your choice.
  6. You will currently get a confirmation message that Your hotspot has been enableed.

In the event that you actually wish to kill this element, at that point essentially click on the Turn Off fasten and confirm your determination.

Remember that your gadget probably won’t be qualified for this element and won’t broadcast any hotspot signal. In the event that you visit the Hotspot page and see the data about Xfinity WiFi yet don’t perceive any alternative to Turn On or Turn Off this element then it implies that your gadget isn’t qualified for this component.

How To Setup Parental Controls for Internet?

In the event that you have children and kids, at that point it is the most ideal alternative that you set up Parental Controls that will let you control the sites and data that your children access on the internet. Parental Controls is a significant component to set up on the grounds that you don’t have the foggiest idea what your children may go over haphazardly while investigating various things on the internet, hence, it is exhorted that you set up Parental Controls for the Internet.

There are two different ways by which you can set up Parental Controls for Internet on your Xfinity Router. Both of these are referenced beneath. You can follow possibly one to set up Parental Controls for Internet on your Xfinity Wireless Gateway.

Through the Admin Panel

Connect to your Wireless Network and open an internet browser.

  1. In the address bar, type http://10.0.0.1 or 10.0.0.1.
  2. A login page will show up. You will be incited to sign in utilizing the login username and password.
  3. When you sign in, go to Parental Control > Managed Sites.
  4. Tap on the slider close to Managed Sites to Enable it.
  5. Presently you can utilize every one of the offered alternatives to:
    • Blocked Sites: You can include the URLs of the sites that you need to be impeded on your Wireless Network. Once included, the site won’t be accessible through your network.
    • Blocked Keywords: You can include keyword(s) that you need to be obstructed from showing up on specific sites.
    • Trusted Computers: You can indicate and choose the gadgets on which you like to hold full internet access. Chosen gadgets will sidestep all the Parental Control alternatives.

Services Blocking:

When you have signed in into the Admin Panel, go to Parental Control > Managed Services.

  1. Click on the slider close to Managed Services to Enable it.
  2. Presently you can determine the following:
    • Blocked Services: You can include the administrations and ports that you need to be obstructed on your Wireless Network utilizing the Parental Controls.
    • Trusted Computers: You can determine and choose the gadgets on which you like to hold full internet access. Chosen gadgets will sidestep all the Parental Control choices.

Through the Xfinity xFi application or Web Portal

Website Blocking:

  1. Download and install the Xfinity xFi application on your Android/iOS Device or head over to www.xfinity.com/myxFi.
  2. Sign in utilizing your Xfinity ID and password.
  3. Once signed in, go to Parental Control > Managed Sites.
  4. Tap on the slider close to Managed Sites to Enable it.
  5. Presently you can utilize every one of the offered choices to:
    • Blocked Sites: You can include the URLs of the sites that you need to be hindered on your Wireless Network. Once included, the site won’t be accessible through your network.
    • Blocked Keywords: You can include keyword(s) that you need to be obstructed from showing up on specific sites.
    • Trusted Computers: You can determine and choose the gadgets on which you like to hold full internet access. Chosen gadgets will sidestep all the Parental Control alternatives.

Services Blocking:

Once signed in, go to Parental Control > Managed Services.

  1. Click on the slider close to Managed Services to Enable it.
  2. Presently you can indicate the following:
    • Blocked Services: You can include the administrations and ports that you need to be obstructed on your Wireless Network utilizing the Parental Controls.
    • Trusted Computers: You can indicate and choose the gadgets on which you like to hold full internet access. Chosen gadgets will sidestep all the Parental Control alternatives.

How to Set Up Port Triggering on Xfinity Router?

Port Triggering is an advanced procedure implied for Wireless Router and web based gaming to improve the web based gaming experience. With Port Triggering, you permit your Wi-Fi Network to speak with a specifically assigned server that permits you have to a superior gaming experience and control the inbound traffic.

For gaming reassures, port setting off is suggested as gaming supports requires open correspondence between your WiFi network and the gaming server. Port Forwarding is likewise another option, however Port Triggering is a much secure procedure than Port Forwarding as it doesn’t leave your Wi-Fi Network presented to arbitrary traffic, in contrast to Port Forwarding, rather it cooperates with the specific servers as it were. The favorable position here is that once your meeting has dropped the port will be shut to any arbitrary inbound traffic and this will shield your Wi-Fi network from any likely hacker or data theft.

How to Set Up Port Triggering on Xfinity Router?

Follow this bit by bit manual for figure out how to set up port setting off on Xfinity Routers:

  1. Ensure that your PC/Laptop/Mobile is connected to the network. Open an internet browser and explore to http://10.0.0.1 or 10.0.0.1.
  2. A login page will be shown on the screen. You will be approached to enter the login username and password to proceed.
  3. Enter the login username and password. (Default username is admin and password will be password)
  4. Once signed in, go to Advanced > Port Triggering.
  5. On the off chance that port setting off isn’t empowered, at that point empower it.
  6. Presently, click on the ADD PORT TRIGGER catch.
  7. Enter the following qualities in the given fields. (Contingent upon your reassure, the qualities may shift. Counsel support producer’s rules for help or quest for these qualities on the internet.)
    • Service Name: Type a name for the port setting off standard you are making. (This is only for your identification)
    • Service Type: Set the arrangement for the port, from TCP, UDP or TCP/UDP.
    • Trigger Port From/To: Enter the inbound port reach an incentive for the port setting off.
    • Target Port From/To: Enter the objective port reach an incentive for the port setting off.
  8. When you have included the qualities, click on Add to finish the Port Triggering measure.

How To Setup Firewalls on Xfinity Gateway?

When you have set up your Xfinity Gateway(router/modem), you ought to improve its security by setting up a firewall for your Xfinity Router/Modem. With a firewall, the security of your router will be improved and your router will be shielded from a wide range of undesirable connections.

A firewall can be called as a boundary that regulates and controls the data that is shared over your network. It shields your router from undesirable access and squares access to specific sites and applications that can install undesirable projects on your PC without your assent. It additionally shields your data from getting taken by forestalling access to any program or site.

How To Setup Firewalls on Xfinity Gateway?

To set up a firewall on Xfinity Gateway, follow these means:

  1. Connect to the network of your Xfinity Gateway from your PC or Mobile Device.
  2. Open an internet browser and type http://10.0.0.1 or 10.0.0.1 and press Enter.
  3. A login page will show up. You will be approached to enter the login username and password. The default username is admin and password will be password.
  4. When you are signed in into the admin panel, go to Gateway > Firewall.
  5. Presently, pick either IPv4 or IPv6.
  6. You will see distinctive security alternatives there. You can choose the choice that you believe is generally appropriate for your network.
    • Maximum Security (High): This is the most exacting alternative accessible and it will obstruct a large portion of the projects aside from web perusing, email, iTunes and VPN.
    • Typical Security (Medium): This is the suggested alternatives and it permits most locales and administrations, however impedes all shared applications e.g uTorrent.
    • Minimum Security (Low): This is the default choice that is empowered when you set up your wireless gateway. It permits all protected applications.
    • Custom Security: With this alternative you can empower or incapacitate various sorts of traffic as you need to or in the event that you need, you can impair the firewall.
  7. Click on Save Settings to spare the changes.
  8. Note: If you have firewall empowered on your PC and Gateway, at that point it can cause impedance, in this manner, it is acceptable in the event that you have one firewall empowered.

How to Restart Your Xfinity Gateway?

On the off chance that you are having issues with Wi-Fi Connectivity on your Xfinity Gateway, at that point the greater part of the regular Wi-Fi Connectivity issues can be settled by a straightforward reboot. In contrast to different courses, Xfinity Gateway requires a smidgen additional time and takes around 10 minutes to reboot. During this reboot cycle, you won’t lose any of the home or Wi-Fi Settings.

Remember that during the reboot cycle, you won’t have the option to utilize your home network, Xfinity Voice to settle on or get any decisions including emergency calls from your home telephone, Xfinity Home and will not approach cameras and any connected home computerization gadgets despite the fact that Security sensors will not be influenced and will continue working.

There are a few different ways of rebooting your Xfinity Gateway, a portion of these are referenced beneath:

Restarting Your Gateway by means of the Xfinity My Account App

  1. Download and open the Xfinity My Account application from Google Play Store or Apple App Store.
  2. Once the application is opened, look down and tap on the Internet tile.
  3. Select your modem from the rundown.
  4. Presently, tap on Restart this device. (The reboot cycle can take as long as seven minutes)

Restarting Your Xfinity Gateway by means of My Account Online

  1. Head over to http://www.xfinity.com/myaccount.
  2. Login in to your record utilizing your Xfinity username and password.
  3. Look down and click on the Manage Internet button.
  4. Click on Restart Modem.
  5. Presently, click on Start Troubleshooting to start the reboot cycle. (The reboot cycle can take as long as seven minutes and the internet will be down during the cycle)

Manually Restarting

  1. Unplug the force cable from your Xfinity Gateway.
  2. Stand by a moment or two preceding connecting.
  3. Fitting the force cable back in once more.

Restarting from the Admin Panel

  1. Connect to the network of your Xfinity Gateway from your PC.
  2. Open an internet browser and head over to http://10.0.0.1 or 10.0.0.1.
  3. A login page will show up requesting that you enter the login username and password. The default username is admin and password will be password.
  4. Go to Troubleshooting > Reset/Restore Gateway.
  5. You would then be able to decide to Reset your gateway or Factory Restore it.

How to Increase Your Internet Speed?

This is an issue that the vast majority of us face, having a moderate internet connection. Having a quick internet connection is the thing that everybody needs except not every person gets it. A few people might be having a quick internet plan yet, they may not be getting the speed that they are paying for on the grounds that they haven’t enhanced their internet speed.

We will examine the variables that influence the internet speed and how you can speed up by upgrading your internet speed.

Perform a Speed Test

Before you start any further, you have to play out an internet speed test to test your present internet speed. This will disclose to you whether you are getting the velocities that you’re paying for or is your ISP the principle guilty party behind a moderate internet connection.

At the point when you’re playing out a speed test, ensure that the wide range of various applications which might be utilizing the internet are shut and there isn’t anything being downloaded on the network to get as precise outcomes as could reasonably be expected.

After the speed test is finished, contrast the outcomes with the speed that you’re paying for on your Internet plan. In the event that the rates are almost equivalent to what exactly you’re paying for, at that point your ISP is doing fine and dandy and not choking your internet connection.

How to Increase Your Internet Speed?

Try another modem/router

One reason why you might be getting helpless internet speeds and regular internet dropouts is a direct result of an obsolete router/modem. You may feel that your router is fabulous and working fine however as a general rule, that probably won’t be the situation.

Your router probably won’t be viable with your present internet plan and subsequently, you might be getting moderate internet paces and internet dropouts. For example, more established routers are not viable with ADSL2+ Internet Plan and henceforth you will get helpless internet speeds.

Scan for Viruses

You likewise need to ensure that your gadget is liberated from infections/malware. Infections can hinder your internet by using not your framework assets but rather additionally your internet network out of sight without you having an idea about it. Scan your gadget with a notable antivirus program to ensure that your PC isn’t tainted!

Check for Filters

On the off chance that your internet is connected by means of a telephone line that likewise has a phone then you will need to ensure that you have great quality filters installed. These filters can have a gigantic effect as they filter out the aggravations on the line. Thus, ensure that your telephone filters are of acceptable quality.

Router Placement

Another motivation behind why your internet speed may be moderate is that your router isn’t very much positioned. The ideal arrangement for an internet modem or router is to put it at a raised spot, above starting from the earliest stage, and spot it at a focal spot in this way, signals are similarly circulated.

Additionally, abstain from putting some other electronic gadgets or deterrents around the modem/router which may cause obstruction with the signs and debilitate them.

Utilizing Ethernet Connections

To get the quickest internet speeds conceivable, you should utilize Ethernet Connections. The facts confirm that WiFi connections give your solace and movability and you can utilize the internet in any room however to get the quickest speeds you ought to favor an Ethernet Connection since it is liberated from all the issues which hinder the WiFi connections and gives the quickest speeds conceivable on your internet network.

Changing Frequency Band

To get quick WiFi speeds, you can likewise have a go at changing the recurrence groups. Naturally, the entirety of the Routers and Wireless gadgets utilize the 2.4 GHz recurrence band which has a higher reach however relatively less speed when contrasted with the 5 GHz recurrence band. In the event that you are having a few rates issues, at that point you can switch over to the 5 GHz recurrence band which gives a lot quicker speeds however has less reach when contrasted with the 2.4 GHz recurrence band. In the event that the router is near your gadget, at that point 5 GHz recurrence band would be the most ideal alternative to get quicker speeds.

Utilizing Wi-Fi Range Extender

On the off chance that you are having powerless signs in your room and that is the principle motivation behind why you’re having helpless internet speeds then the best activity is to utilize a WiFi range extender or WiFi Booster. These are gadgets that take the signs from your router and re-broadcast it, intensifying its reach and signals. These are modest gadgets, for the most part costing under $50 and with the assistance of these, you can fix your signs issues.